Hot Rod Hobbies Shoot Out - 2008

Tires:

Front: Red Taper Pin, stock rear foam
stuffed inside

Rear: Red BK Bar, I ran Trinity blue and white foam (don't know what
foam Hara was running).

Suspension: 1A camber link with two
washers on the tower.

25* castor blocks (stock),
forward.

Trailing axles, spindle mounted
in the middle.

Two bump steer washers.

Forward Ackerman hole.

Camber: ~-1°, slight toe-in.

Ride height was arms level

Shocks: AE shocks, #2 piston, 35 wt. Oil: brown Spring. 0 limiting
inside or out.

Mounted inside hole on the tower,
outer hole on the arm.

Suspension: 1B camber link with one
washers.

3* toe in bar, stock hubs

.060" shims below transmission.

0 antisquat shims (about 5*).

Camber: ~-1°

JConcepts 6" HD wing mounted forward with about no vertical
gurney.

Ride height, CVD's just above level.

Shocks: AE Shocks, #56 (red) piston with 30 wt. oil.  Silver
spring.  0 limiting inside or out.

Mounted an extra hole in on the tower (a 0 hole, if you will, just a
quick drill with the dremel), third hole on the arm,