Academy SBV2 Pro - Beeanner

Car
has some slap if launched hard. High corner speed, but will step out
if pushed too hard. Jumps great, very even flight attitude. Floats
through rough sections. slight corner ent push

Front:

3h
1.5m pistons, 37.5 oil, ACD black spring. 1mm travel limiter,
standard bladder

2-a mounting.

#2 camber mount on tower.

arms level

-1° camber

1.5mm shim under outer steering hub link ballstud

2h
pistons drilled to #55, 35wt oil, ACD white spring. no limiters,
standard bladder

3-a mounting

1-a camber mount

-1.5° camber

kit toe in and anti-squat

Bones level.

Short arm setup.

Arms shaved down 1.5mm on the back portion of arm (inside arm
mount) and shimmed back. longer wheelbase, makes the car a little
more forgiving.

Ackerman
link 5mm longer then kit

Center chassis brace

Front diff with center one-way

J concepts medium rear wing with losi wing mounts lowered on rear
tower

Diggity towers.

Standard 6 cell on left layout.

Panther soft switch 2.0 rears and panther 4wd bobcat soft fronts
sauced with buggy grip.

10x1 Banzai Checkpoint, 16-80