Pheasant Run

FRONT

3-A Piston

#65 spring

Losi 35wt oil

Shock on the outside on tower, middle on A-arm mount,
mount placed inside on arm

1-1 Camber link ( inside on bulkhead, inside on Caster
block ) 0mm under ball stud

Axles up

0 spacers on Ackerman

25 degree block

.5 spacer

3-A Piston

#65 spring

Losi 30wt oil

Shock on the inside on tower, inside on a-arm

2-2 camber link, ( middle on bulkhead, outside on hub )
0mm under ball stud on bulkhead

2mm spacer under ball stud on hub

Hubs spaced slightly back, 4mm spacer in front, 2mm spacer
in the rear.

Battery spaced
forward.

1/2 IN BULKHEAD, 1/2 under steering ackerman. 1/4 on each
side of chassis in triangles nearest to servo. 1/4 on each
side of chassis in triangles nearest to rear tower

3800 LiPo

Vortex 6.5

78/17 gearing.

Track was
outdoor loamy/sandy track. I ran Red Ifmar pins with Blue
Carvers up front in qualifying, then Red Studs with Blue
Carvers in the main