Med-High Carpet Track

My setup
for a technical med-high grip carpet track:

Motor: LRP 13,5 Erasor "Stock Spec" (Has a sintered Rotor)
with 6cells

One way,

Chamber 1,5° F+R

Castor 4°

Ground clearance : 5mm Front, 5,5mm Rear.

Droop, 6mm front, 5mm rear.

No Suspension arms (Rollcenter)-spacer

Block combo: Front D-D, Rear A-E (2° toe in)

The upper arm mount on the bulkhead i used the inner hole F+R.

Damper positions: F hole 2, R hole 3.

Medium swaybar F+R.

I also use 3 center posts for carpet.

Dampers:

50 oil (Tamiya Green) F+R

Tam. White F

Tam. Blue R

No O-Rings or Rebound foams

I also build the dampers without rebound

The rest shimms and positions are al like in the manual.

Tyres: Vtec 27R with JB "blue,Yellow,blue" foam inserts.

Body: HB Mazda6.