Reedy Race Practice - Speedworld, Roseville

Front

Oil 40wt

Caster Block 3° Piston Tamiya 3

Toe-out 1° Spring 22lb AE

Camber 1.5° Diaphram STD

Ride Height 5mm Compensator None

Coupler Height (High/Low) Low Low Rebound 75%

Clamp Raised 0mm 0mm Droop 6 Wishbone Hardness std 35

Wheelbase Spacers 2 0 Roll Bar Copper Camberlink Spacers 0mm

Coupler Std Std Track Width Std Front Drive Alum Spool w/delrin
outs

Coupler Shims 2mm 2mm Pulley Size 36 Tooth Hex Width narrow

Oil 40wt

Upright Toe 0° Piston Tamiya 3

Camber 1.5° Spring 22lb AE

Ride Height 5mm Diaphram STD

Clamp Toe 1mm in f Compensator None

Coupler Height (High/Low) High High Rebound 75%

Clamp Raised 0mm 0mm Droop 5

Wheelbase Spacers center center Roll Bar Copper

Coupler Std 2 Std Track Width Std Wishbone Hardness 35

Coupler Shims 1mm 0mm Pulley Size 36 Tooth Hex Width narrow

Front Tyres Sorex Pre 36 Insert
Stock Wheel Speedmind Temp N/A

Rear Tyres Sorex Pre 36 Insert Stock Wheel Speedmind Temp N/A

Chassis 2.4mm Pulley Size 21 T Ratio Final 4.21 Spur 101 Pinion ?

Motor Losi 13.5 stock timing Rotor STD Timing stock

Fan Standard Fan

Radio M11 Servo Futaba Low Profile ESC & Prog "Losi
Xcelorin at 2 drag, timing up"

Body Protoform Speed 6 Wing Std/all the way back

Additive Tweak/buggy Grip 2 Weight

Surface Asphalt

Traction High

Temp. Final Qualifying Finish

"1mm steering knuckles, ultra
short wheelbase with couplers and pulleys."