Halloween Race - The Gate - Cleveland

This is Craig Xavier's set up
from this past weekend at the classic. This was pretty much his
2nd or 3rd time running the car so he may change it some in time.

Halloween Race @ The Gate Setup:

Front:

Kingpin Lube: 10,000

Springs: .020"

Camber: 1.5 deg

Caster: Max(Both shims back)

Toe: none

Upper Mount: 10

Up Travel: none

Servo: Flat

Steering Ballstud: Med + .5mm shim

Front Ride Height: 3.5mm

Front Width: 164mm

Rear:

Shock Oil: 35wt Losi

Shock Spring: AE Copper

Shock Length: 65mm

Rear Pod Droop: 1mm

Forward Shock Ball Stud: Long

Spacers Under Fwd Ball Stud: 1.5mm

Flex Plate Thickness: .070"

Flex Plate Preload Screws: No

Rear Ride Height Adjusters: IRS 3mm

Battery Placement: Back

Rear Ride Height: 3.5mm

Rear Width: 172mm

Tube Lube: 10,000

Axle Shims: As Needed 172mm Width

Body:

Body Parma Speed 8 LW

Rear Body Mount Position: Back

Tires:

Tire Compound: F: Dbl Pink/R:
Yellow Jaco

Tire Diameter: F: 42mm/R: 44.5mm

Wheel Diameter: Oversize

Half compound front tires/Full compound rear tires

Jack the Gripper as per track rule

Motor

Motor: Express Motorsports CO-27

Brushes: F-brush

Springs: Red

Pinion: 31

Spur: 95

Diff Grease: AE

Battery: Express Motorsports EP4200

Others:

Speedo: Tekin FX Pro

Receiver Pack: No

Weight: 830 g