High Grip Indoor Track

This was very driveable on higher grip
indoor tracks e.g. NERCR regional, I'm still struggling for a bit of
steering on the slippy floor at the local club but part of that is my
driving!

I'll run through it quickly as it is
now...

Front

Shocks - 501X, 3mm internal spacer

Piston - Option 1.3mm

Oil - Much-More #500

Spring - DB01 kit

Shock mounting position - 3rd hole out top, middle hole bottom

Ride height - Bones level

Camber link - outer hole inboard, kit outboard

Camber - 1 degree negative

Drive - One-way diff (always seems faster unless you need a lot of
braking and the grip is low)

Toe-in - straight ahead

Shocks - 501X, 2mm internal spacer

Piston - Option 1.4mm

Oil - Much-More #300

Spring - DB01 kit

Shock mounting position - 3rd hole out top, outer bottom

Ride height - Bones level

Camber link - kit

Camber - 1 degree negative

Slipper and front UJs fitted.

12x1 V2 motor on 18 pinion.

EP 4200 cells, Keyence speedo, Futaba 9451 servo