Eden Park Raceway

Here is the set-up me and Alec Springer are running on the Tamiya Vega at EPR.

Front

Stagger ribs, normal ones with no insert, wheel cut down.

Shocks - 1.3 piston (Stock, Alec has drilled his with a 1.3 drill bit), blue Tamiya spring for Alec, kit Tamiya spring for David, 30 weight losi oil

2nd outer on tower, middle wishbone.

4 mill under out ball stud on steering turnbuckle. Inner side front hole on the drag link.

Camber turnbuckle, inner on hub, inner on tower with 2 mill under ball stud

hub in middle, spacer either side of the hub.

Rear

Yellow mini spikes with Mr O foams.

Shocks - 1.4 piston (same technique as front ones), yellow Tamiya spring for alec, kit Tamiya spring for David, 25 losi oil

middle on shock tower inner on wishbone

0.5 hubs on my car, 0 deg hubs for alec.

Long wheel base.

Link, outer on hub with 3 mill under ball stud.

we played around with the inner ball stud, i ended up on the upper 2nd inner hole (starting from the inside on the rear turnbuckle ball stud)

3 deg toe in brace (The toe in block is the right way up.)

1 mill shim under the front brace

Ride height is wishbones level front and rear.