Snowbirds

Here's
my setup pretty close to what I ran at the snowbirds

Front
end:

tamiya shocks

steel spool

xray oil 350

hpi gold springs

no swaybar

blocks used in the front were 1.5in the rear of the front and
1.5 in the front for no arm sweep

wheel base 2.5mm shims in rear and 1 mm shim in front

ackerman plate mounted in middle hole

1 mm shim under steering post

1 mm shims under ballstuds on bell crank

.5 shim under ballstud on c-hub

3.5 mm shims under front camber link inside to make camber link
flat

droop 6 on gauge

0 block in front of rear

3 block in rear

tamiya shocks

xray oil 300

hpi springs silver

no swaybar

2 mm shim under inner ball stud on camber link

droop 6 on gauge