Minnesota StateChampionship Race

Front end

5 degree blocks, full caster,

Assoc 12th size .020 front springs, no droop, #2 lube on kingpins

0° toe

1.5 degrees camber,

Front width: 192.5 mm,

9650 servo, servo flat, Medium black Kimbrough
saver, studs at top holes, one washer under outer studs, tie rods
straight both ways...

Shock has 30 wt. with 2 hole piston, stock silver spring, tubes have
surelube #3, chassis has a small amount of droop, maybe 1mm or so.

Long or soft fiberglass flex plate
setting

Rear end width: 204.5 mm

Ride height was kept as close to 4mm as
possible to fight traction roll, with pod on same plane as chassis,
and about .5 mm more rear ride height, just a little rake and some
rear droop...