BRCA National Southport

Front

Springs blue (no compression
spring) 5 1/2 turn in older style

Oil 30wt losi

Piston kit (1 hole 1 groove) with hole drilled out to Losi Orange
and with standard rebound valve

Rocker mounted upside down

Pushrod under rocker

Droop 37mm

Std front arms with 0 washer behind wishbone

Cone washer replaced with 2 x 1mm washers

No roll bar

Ride height 18 mm (driveshafts just below level)

Front wing cut so it is as large as possible

0 toe out

-1 degree camber

Springs blue and compression spring
5 1/2 turn in older style

Oil 37.5 losi

Piston kit (1 hole 1 groove) with hole drilled out to Losi Orange

Lower hole on shock mount

No roll bar

Std wheelbase

Ride height 24mm

1.5mm rear block (reduces on power steering)

Large rear wing with full gurney

3 degree toe in per side

-1 degrees of camber

Rear upright in upper hole