Middle River Hobbies

Ron Goetter and I ran our cars at MRH in Maryland yesterday. Their track is pretty unique as it's quite small and pretty decent traction levels. Sweep 32s are the tire of choice.

As for setup advice, Ron and I went 2 completely different directions in setup and I think Ron's car is closer than mine to where we'd really want them to be.

My setup had the following (without filling out a setup sheet). This was with running 17.5 blinky class.

Front End -0 degree arm sweep

-.5mm arm mount spacers

-stock camber link position

-stock ackerman spacing

-stock arm spacing

-40wt shock oil with 3 hole piston and VBC Orange spring

-Spool with VBC ECS shafts

-Sway bar disconnected

-5mm right height

-Droop 1.5mm above ride height

• -1 camber and .5 deg toe out

-2 deg toe

-.5mm arm mount spacers

-camber link all the way in on the inner mount (longest hole on the inner mount) and inside on the hub with stock spacers

-stock arm mount spacing

-40wt oil with 3 hole piston and VBC Green Spring

-5.5mm ride height

-Droop 2mm above ride height

-Sway bar disconnected

-Gear diff with stock diff oil

• -2.5 camber