Rutted Loose Track

The track became very rutted and
loose.

Front

springs silver

oil 40wt losi

piston kit without rebound valve

pushrod under rocker

pushrod length 33mm

revised front arms with 2mm spacer and 3 shims behind wishbone

cone washer under outer ball end

roll bar none

ride height arms just above level to get the nose up

front wing kit with standard lines followed with 2mm spacer
under rear mount

toe 0 degrees

springs blue (no compression
spring)

oil 35wt losi

piston kit

lower hole on shock mount

roll bar none

wheelbase lenthened 2mm

ride hieght arms level

1.9 degrees of antisquat

J-concepts 7" HD wing with full gurney

3 degrees of toe-in per side

.5 degrees of neg camber

rear uprite in upper hole

no one-way center prop shaft.
full time 4wd.

front diff med-loose

rear diff -loose

rear droop limited 2mm