USIC - Cleveland

Highlights:
Used Spool
Excelerate tires (fronts glued a couple mm onto flat surface, Position #5 on JP3D Excelerate Tire Marking Template.
7/.5 CC Plates
Ran new adjustable rear wing mount in position #3 (slightly higher than stock)
Ran electronics on upper deck instead of lower deck, using prototype electronics tray from JP3D
Used new CRC split rear deck on top of JP3D lowered side dampers with 100k Excelerate grease.
.50 springs all around
approx 4.5 ride height all around
Used Excelerate body. Had to drill new rear body mount holes moved further in, and dremel off the outer wing portion of rear deck, to allow body to fit.