Kazuo Ishikawa

CRC Carpet Knife V3.2R - Kazuo Ishikawa - 19/10/2005 - Yatabe Arena

Tire: Yokomo ?? 41mm

Wheel: Yokomo

Traction compound: Inner Quarter - Half - 15 minutes

Spring: CRC 0.5mm

Shim: 0. 5mm

Caster: 10° variable (aluminum)

Camber: 1°

Axle: CRC nylon

CRC nylon upper arm

Toe: 0 degree

King pin shim: 1. 2mm up and 1mm down

Front ground clearance: 2.4mm

Rear:
Tire: JACO Blue 43mm

Wheel: CRC

Traction compound: ? - 40 minutes

then All - 10 minutes

Shock oil: #600

Damper length: 68mm

Roll dumper oil: CRC heavy (white cap)

R axle # 1

Side spring: white

Center pivot position (= CRC low roll center kit?)

Height: 2.8mm battery side, 2.4mm rear axles
Comments:
Lower chassis 3.2: 2.1mm

Approximately shim (intermediate state)

Motor: Orion V2 9x2

Motor brush: normal

Spur: 96 - Pinion: 29

Battery: LRP 3800 Fat Boy

Body: SP8

Spoiler blade tip board: 10mm

ESC: GM purple SX12WM

Receiver LRP PHASER

Servo: S9650

Using the remark strut bar the 2mm thick material

Both outside inside pyro ball of roll damper Installation section the shim
of 2mmAs for strut bar 2mm thick mosquito I duck material use

Servo position from normal 8mm rear

In receiver power source lithium polymer use

For more information, visit Ishikawa
website