Exeter Hobbies

I got my MM RB6 dialed on a wet track oh boy does she work.. TQ by 6 seconds against the whole field of rear motor buggy and won the race by 8 seconds ahead of 2nd place car and pretty much lap the whole field Friday night race on 17.5 expert class.. It took quite some time a lot of setup changes to make to work on wet low to medium traction track but finnaly got it dialed in.

Front:

Shocks = 30wt losi oil

Piston = 55 losi piston

Shock position = middle hole

Shock position lower arm = outer hole

Spring = avid white

Front Caster "Kick up" = 25 degree

Caster front Hub = 4 degree insert

Front toe = 0

Link position front = middle hole with 0.5mm shim under the ball stud and 0.5mm on C-hub under the ball stud.

Ackerman = 0 spacer

Ride height = 22mm

Camber = 0.5

Front tires = Proline M4 ribs with open cell

Shocks = 25wt losi oil

Piston = 54 losi piston

Shock position = inner most hole

Shock position lower arm = outer hole

Spring = avid purple

Rear toe = 3.5

Rear camber = 2.5

Rear Link position = inside inner most hole with 2mm shim under the ball stud, use outer most hole on the rear hub with 1mm shims under the ball stud.

Rear tires = Proline M4 Tazer with open cell

Ride height = 21mm

Anti-squat = 0 degree

Rear Pro-squat = 0.5 degree

Rear arm = I use the RB5 SP rear flat arm

Suspension hangers = wide

Rear Wheelbase arm = 0.25 mm front, 0mm rear

Rear wheelbase hub = 1mm/1mm