Adelaide RC

Out of the box the truck is faster and easier to drive than the T6.4 series on these tracks. A few changes we have made:
3 hole pistons ride the bumps better and feel more stable on direction change
we've raised the rear roll centre for more rotation and drive off the corner
stiffer rear spring jumps a little better
rear roll bar was good on Astro but we took off for clay

A few tips:
T6.4 bodies will fit directly into the body mounts. You will need to trim approx 6mm off the bottom of the body and a little around the front camber link.
we used longer turnbuckles (67mm rear on the front, and some 75mm for the rear) as we had some ballcups bend with these link lengths
we use the B84 HD servo ballcups on the servo link for some extra strength