IIC - Las Vegas - Cleveland

Modified setup used in [2007 IIC] Las
Vegas and The Holloween race [Cleveland].

Front

Small pulleys for the 1.71 ratio..

Short wheel base in front and rear..

Front shocks oil 50wt 1.1mm 2 hole
piston or tamiya

Front shock spring 33 pound front spring

Front shock position on the tower... 1 Hole in

Front camber link ... Down and short

Caster 6 degree's caster

Front hinge pin height 8mm up from chassis

Front Camber -1.8 deg

Front wishbone or Arm . CF5

Shock on arm inner hole

Front track width 188mm

Ride height 4.5 mm

Droop 1.5mm above ride height

Rear Shock oil 40 wt 3 hole 1.1 mm or
tamiya

Rear Spring 19 pound.

Rear Shock position 1 hole in from top ..

Rear shock on arm is outside hole

Rear Arms are 80%CF

Rear Camber link low and short on tower with specialized rc rear
hubs with 1.5mm under ball stud..

Rear Toe 2 degrees.. shim according.

Camber 3 degree

Ride height 5mm

Droop 1.5mm above ride height

Hinge pin height is 8.0mm from chassis up measure in the middle of
the pin..

Top deck is a 2.9 mm thick

Jaco Pinks all the way around cut to
56.8mm