ROAR Nationals - Hobby Plex

Here is MMR Driver Mitch's A Main
Rubber Setup 13.5

ROAR Nationals at the Hobbyplex, Omaha, NE.

Novak 13.5 Brushless

Novak GTB

Molzer Mowery Bracket Cells

Parma Alfa 10074

Front

Servo
saver ---- inner short

Shock ---- 3 hole piston, kit oil (500 cst), orange spring

Front axle ---- one way

1.5 degree camber, 5 mm ride height

Front block ---- 1 degree

Rear block ---- 0 degree

Wheelbase set at min, all washers in front of the arms

Inside upper link mount ---- inside rear with 2mm spacer

Arm mount hole for steering link ---- short

Front c-hub ---- 6 degree with 1 mm spacer under upper link

Upper shock mount ---- 3rd hole in

Lower shock mount ---- outside hole

Downstops set to produce a 9 1/2 mm ride height at full
extension

44/96 gearing

Front block ---- 0 degrees

Rear block ---- 3 degrees

Upper link--inner mount inside with 2mm spacer, middle hole on
the hub, 1mm spacer

Wheelbase ---- 4mm in front of the arms (max rear wheelbase)

Shocks ---- 4 hole pistons, kit oil (500cst), yellow spring

Rear axle ---- gear diff medium oil

Rear upright ---- 0 deg

Upper shock mount ---- 3rd hole in

Lower shock mount ---- middle hole

Downstops set to produce 8 1/2 mm ride height at full extension

2 degree camber 5mm ride height