Dusty Loose Bumpy Track - Southport

Front

springs blue (no compreision
spring) 5 1/2 turn in older style

oil 22.5wt losi

piston kit with standard rebound valve

pushrod above rocker

pushrod lenth 33mm with shockball undone 1turn

revised front arms with 1 washer behind wishbone

cone washer replaced with 4 losi gold ballstud washers. 3 under
outer ball with 1 above

extra midde hole drilled for roll bar

roll bar 1.2mm (standard) middle hole

ride height 18 mm (driveshafts just below level)

front wing kit with standard lines followed with shock cartridge
white washer under rear mount

slight toe out with 2 degrees of camber

springs blue (no compression
spring) 5 1/2 turn in older style

oil 27.5 losi

piston kit

lower hole on shock mount

roll bar 1.2mm in stiff hole in lowered position (pic to follow)

wheelbase lenthened 1mm

ride height 22mm drive shafts just above level)

1.5mm rear block (reduces on power steering)

large rear wing with no guerney

toe in to middle of front wheel

2 degrees of camber

rear uprite in upper hole

6.5 geared on a 19/20 tooth much
easier to drive

poss cut extra 1/2 a row off the outer front to get less snatch
when grip was very high