Japan Champs

CRC Carpet Knife J-Spec -

• Japanese championship -

• 2006/11/19 - Team CRC Japan
  -

**Front

**

Spring: 0.022”

Camber and the caster, the toe: 1°, the slide caliper to measure the tread of the shim and wheel front and back on front and back, front and back difference 1.0mm　

Under 0.25mm king pin shim: spring and under 0.5mm knuckle, knack

King pin damper ring: #1000

On 1.0mm [ru] and on 1.5mm upper end

Rebound: 0

1 tower bar: aluminum make front end brace O rings

From servo mount: [asoshi] make original slant loading

Servo saber: [kinburomidoru], most arranging the pyro ball in the hole inside

**Rear

**

Roll center (side link high): standard

Barely in state of side spring: CRC white 1G floating

Friction grease: #2000　　

Ride height adjuster: IRS 2.0

Center shock:CRC Dura-Shock　

[shiyotsukuoiru] spring: #600 lead-lead

Rebound: 0.9mm

Rear tread: 169mm

Other

Motor: Team Br00d checkpoint 8×2

Battery: DryHopIB4200VR-1W gold　

No additional electricity:

ESC: GM SX12WM

Servo: 3401

Receiver: 203F

Deciding set (only above-mentioned set and modification place)

King pin damper ring: #300

Height: approximately front 2.5 and rear 2.5

Grip medicine: HG30 minute + [kopaton] 20 minute total 50 minute

Rebound: 1.1mm

Approximately foil: TRC

Rear tread: 167mm　　

ESC: MX PRO competition (program mode
5)