Japanese Championship - NRC - 2006/11/27-29

**Car: Carpet
Knife Japan Specifications conversion (CRC J-Spec-Wb)

**

**Front:

**Tire: CRC
purple HR-38 gluing end - Diameter: 42mm

Spring: CRC
.020 (approximately 0.5mm)

Camber: - 1°

Variable caster: - 10°

Caster: Center (on front and back of caster block shim)

King Pin shims: Under the thick: 2 spring under thick 3 upper on upper
it is thin 1

Toe: Barely out

Spacer under [roaamu]: Approximately 2.0mm (Fibre Lyte Fibre003)

Tire treatment: After the black can 10 minute TC-4 inside 1/2 15
minutes

Others:

Steering wheel block: CRC4277B

Caster block: CRC4266

Lower arms: .060 [roado]

Brace using one for L4

The king pin using the Y corporation

L4 Bumper

The servo mount and servo saver horn using the domestic K corporation

**Center:

**Shock: CRC
DURA [CRC4281] - Oil: T corporation #600

Spring: blue
[CRC1295] barely preload

Side damper: CRC
lead-lead [CRC1340]

Oil for side damper]: M corporation #5000

Droop: - 1.mm (in lower brace rear end measurement)

Others:

L4 Antenna mount

Connecting between the shear braces left and right with link

The washer of approximately 0.3mm is put between the center ball and
the rear bottom plate

**Rear:

**Tire: CRC
Magenta HR-38 gluing end 45.2mm

Gear ratio: 23/92 spur gears PRS

• PRS6492

Tire treatment: TC-4 15 minutes extensively after the black can 10
minute

[haitoadaputa]: I corporation 1.5mm down

Others:

Body: Speed 12 attachment, somewhat with the glass tape
reinforcement

Motor: Team
Br00d CP 8×2

Standard brush and brush spring

Diff.: I corporation small

Battery: Pro
Match Racing
IB4200 matched

Additional battery and regulator for receiver: VXR
Racing

Ball
bearing & Diff balls for Kimihiko Yano

Something related to RC device

Transmitter: M11

Servo: NES-3125

Receiver: RX431

ESC: Sphere Competition

Links

• Kimihiko
  Yano - Full Race Report

Source: Kimihiko / Yano