STCC Rd2 - Eastbourne

The track is very tight and twisty,
but also low grip. I started off pretty much with the Reedy race
setup.

Played about with it during open practice and the first two
qualifiers but definitely wasn't happy with it. Saw Andy Robson's
car going very well. So quickly changed the setup over and the car
was 100 times better. Qualifed 5th on this last run, but had a few
silly mistakes, without those I should have been looking at top 3.

Unfortunately it the rained for the finals so switched to my wet
car. Thanks to Andy and his dad for helping me out! Heres the setup

Front

5mm ride height, 2 deg camber, 1
deg toe out

4 deg caster blocks, 2mm spacer in front of wishbone

1A Steering link, no washers under ball studs.

Spool

50wt oil, Losi pistons, Gold spring

Shocks 1 B, Camber link 3

Arm mounts 2A with 1.5 deg spacers f+r

Droop - 6

5.5mm ride height, 2 deg camber,
2 deg toe in (total)

0 deg hub, 1mm spacer in front of wishbone

Alu diff set medium

40wt oil, Losi pistons, Blue spring

Shocks 2 B, Camber link 5 A

Arm mounts 3A with 3.5 deg spacer rear and 1.5 front

Droop - 5