Grand Blanc

Setup
sheet

Front:

2B Camber Link, 2 washers, 30* caster
blocks, forward, inline axles, middle spindle height, .170" bump
steer washers (it's a lot, I know), forward Ackerman hole

Shocks: mounted inside on the
tower, outside on the arm. Get the shocks to be 3.00" long at
full droop (I'm running like .060" inside losi shocks, but then
I've unscrewed the shock end ~2 turns).

Losi: 56 piston (red), 30wt oil,
orange spring

AE: #2 piston, 30wt oil, brown spring

1/2 aluminum degree hub carriers, 'B'
hole, 1 washer. On the bulkhead, run the 2 hole, but either
counter-bore the ballstud or just grind away material to lower the
ballstud .060". Run a nut on the bottom and the bulkhead won't
break. [This camber link stuff is key, so don't just run 2B and think
it'll be close enough!] Then run a 4 toe block (3 if running stock),
.090" AS spacers, one .030" spacer in front of the arms, one
.030" spacer behind the hub carriers, no spacers under the
transmission.

Shocks: mounted inside on the
tower, middle on the arm. Get the shocks to be 3.48" long.

Losi: 57 piston (black), 27.5 wt oil, pink spring

AE: #3 piston, 27.5 wt oil, silver spring