Tamiya USA

Had the opportunity to put some laps in with the Evo6. So far the car is very promising. Easy to drive and has got some pace.

My setup is basically stock with the exception of the following:

Front and rear shocks in one hole on tower
Titanium and aluminum screws
1XB/1B split blocks front and rear
no spacers under front blocks
HPI silver springs
Muchmore 450 shock oil no rebound
2 degrees camber front and rear
Droop 25mm front / 24.7 rear

There is plenty of space for whatever sized pinion you dare try. Picture below shows a 60 with lots of extra room.

Also ran the car with a 17.5. Here's a video demonstrating a few laps. Thanks for shooting the video goes to OSherman.

Source: R. Canare