Carpet Knife V3.2R - Team CRC Japan - Aichi prefecture

- Carpet Knife V3.2R -

- Team CRC
Japan -

**- Aichi prefecture

• 13-05-2006 -**

Tire = カワダ SH39.5 mmWheel = TRC yellowSpring = Wolfe Motor Sports 0.5 mmCamber, caster and toe = 1 time, on front and back shim and 0 degreesWolfe Motor Sports attachment color under king pin shim = spring, under knuckleOn 0 25mm and knuckle 5 mm, on 0.75 mm upper endThere is no reboundTower bar =aluminum make front end
brace. It is hard 3 0 rings of the めThere is no ride height spacerFrom servo mount = アソシ make original slant loadingServo saber = カワダ, middle hole
Rear:
Tire = カワダ LH 4 1 mmWheel = Yokomo
ブラックRoll center - (side link high) =CRC low roll center - kitAs for
ball under side spring= CRC white spring removal tension approximately 1mmFriction grease = capital trade # 1 000Ride height adjuster = IRS 2.5Center shock
= CRC Dura-ShockCenter shock oil = capital trade # 1 000The same rate spring
as center shock spring = CRC lead-leadRebound = 0Rear tread = 172mm
Comments:
Body = perm speed 8
The car weight = 865 g
Chassis =ABP chassis(board thickness approximately 2.6mm)
Gear ratio exponential = spur 92T and pinion 24T
Motor = CheckPoint / team brood  8×2
Battery = DryHop / IB4200RV-1
There is no another electricity 
ESC = GM SX-12M
Servo = 3401
Receiver = 203 F

Translated
original page