Prima Felt GT

I raced my car on Friday night and it
performed better than it had ever done before, the difference between
fastest and average laps was about 4/10th sec and the car was very
easy to drive consistently. I had previously been using a setup more
suited I think to a high traction surface, but we run on Prima Felt GT
with a low to medium level of traction.

Here's the setup I used.

Front

5deg blocks, 6deg static castor,
1.5 deg negative camber

Silicone lube on kingpins (it dries fully so nothing sticks)

1 deg toe out

Jaco 2x pink, 80% additive, 42 mm dia

4mm ride height, servo up, AE 0.020" springs

5000wt oil in side dampers, forward
position on pod plate

Gold spring, 30wt oil in centre shock, 1mm spacer under forward
ball stud (HB Shock)

Thin L plates, stock roll centres on all three balls

Batteries fully back

Jaco Yellow, full width additive, 44.5 mm diameter

4mm ride height, pod level, 1.5 mm droop