Michiana RC Raceway

Front End:

-Old-school Associated with no shims under the front*

-.020 Associated Front Springs.

-Servo laid flat.

Center Shock:

-CRC Shock with 35wt Losi oil.

-Front shock mount raised .080" (gives more on-power
steering)

-Associated Copper spring*

-Pod "Droop" .030". (measured by taking a
straightedge from back of pod to chassis, the .030" is the
gap at the chassis & pod joint)

Rear End:

-Damper Lube is OLD Bud's Lube (Try Heavy CRC or Red Muddslide
Lube)

-.021 "Blue" Speedmerchant springs- no preload. (Not
sure how that compares to the whites on CRC cars)

Rest of the stuff...

-Parma Speed 8 HD body.

-Parma Magenta Front & Pink Rear tires.

-Putnam CO27 Stock Motor.

-ProMatch 4200 EP cells.

-Approx 1.60 rollout.

*I need to get a few wedge shims
from Speedmerchant to give a little extra camber- fronts are
"cone-shaped" from not having enough camber. Probably go
back to a red center spring to tame the car down a little bit- the
copper spring makes it a bit too aggressive on the corners, making
the car inconsistent.