Cleveland

This setup is a little different than
what I usually run but it worked great in Cleveland this year. it
should work good for any high grip race.

Front

0.45mm spring, very little pre-load

Full caster

10 deg. reactive arm mount

Camber set so tires wear flat (about 1 deg.)

About 1 deg toe out

Trailing axles
Rear

Blue cap damper fluid

White side spring (about 1 turn of pre-load on each side)

Red center spring

30 wt. shock oil

Ride height - 4mm front, middle, and
rear

Battery position: Forward

Droop set so when the car is ready to race, if you lift the center
of the car it will raise about 1mm. With the new car, 2 full length
ball cups threaded all the way onto the shock should make the droop
about perfect.

**Tires

**Front

CRC Pro-Cut Purple 1.68in 2/3 traction compound

Rear

CRC Pro-Cut Magenta 1.73in full traction compound