Indoor Track

I run Big Bore shocks on my 2wd for the first time yesterday indoors on carpet with jumps and slippery sections.

With a variation of different pistons on the way for testing I run very close to my normal set up as listed below but with this compination of oils and pistons.

The result was really good but unfortunately got beat by Darren Bloomfield in the final (he is good though!!) LOL

Front - Big Bore

Piston standard 5 hole - New Super Hard Orange

40w Oil Losi

Shock mounted outside hole on wishbone and middle on the tower

3 mm washer under the inner side of link - middle hole

Outerr link on long position

Kick up - 30 degree

Rear - Big Bore

Piston 5 hole drilled to 1.5 with a Yellow Spring

30w Losi

Drilled additional very inside hole on wishbone and one in from the outside on the tower.

Short wheelbase

Camber link inner on the lower outer hole of the tower with it at the longest on the hub

0 deg rear habs

Under speedo weight - 92g and this never comes out of mine!

Under Lipo weight should be adjusted subject to what type of track.

If there are little jumps, rumble strips etc that upset a normal car then run under lipo 74g

Ride height at 20mm

Schumacher Staggers up front - old type with no foam

Schumacher pins on the rear